Table of Contents
Advertisement
3.3
Conditions for use
The possible operating conditions of the heaters are: CHECK-UP, LIGHTING,
STABILISATION, LIGHTING RECOVERY, NORMAL, MODULATION, SAFETY,
EXTINGUISHING, LOCKING.
CHECK-UP - This is a stage required for self-diagnosis of the probes and for initial
cleaning of the combustion chamber before the LIGHTING stage (appears on
display as "CHEC").
LIGHTING - Stage during which the flame is primed (appears on display as
"Acc").
STABILISATION - Fixed time stage in which the flame is propagated to the whole
of the combustion bed before entering the stage of NORMAL operation
(appears on display as "Stb").
LIGHTING RECOVERY - This condition is reached when not all the factors for
passing on to the condition of normal operation occur (appears on display as
"rec").
NORMAL - This condition of operation is reached at the end of the STABILISATION
stage. The user is now able to manage the product's operating power. On the
display will appear the time schedule, the operating power, the ambient
temperature (ERGOFLAM AIR) or the temperature of the water in the boiler
(ERGOFLAM IDRO).
Page | 47
Hide quick links:
Advertisement
Table of Contents
