Table of Contents
Advertisement
2.1 Indoor positioning
Our product, both in the AIR and the IDRO version, is a heater that draws air that
is necessary for its combustion process directly from the environment to be
heated.
For this reason and for the even more important reason of safety for the people
using it, the heater must be installed in a sufficiently ventilated place in order to
guarantee a continuous flow of air at all times.
It is therefore essential to make air vents connected to the outside. See example
in figure 2.1
i
Important to also understand the requirements of the UK and ROI Building
Regulations (see 2: Installation)
Figure 2.1: Example of making an air vent.
Detail A
Page | 15
Hide quick links:
Advertisement
Table of Contents
