Timer Menu; Programming The Daily Timer - Olivieri ERGOFLAM IDRO Installation Instructions Manual

TIMER MENU

In the field of the timer menu it is possible to programme the heater daily, weekly
or for the weekend, that is to say it is possible to choose a heater programming
that is the same from Monday to Friday and a different one for Saturday and
Sunday. We will now show the programming procedure in detail.

Programming the Daily Timer:

Press the MENU button, scroll through the various menus by means of the power
regulating buttons and finally enter the timer menu by pressing the SET button.
Choose the type of programming to be changed with the POWER + and POWER
- buttons.
From the time menu enter modify mode by pressing the SET button. The message
"gior" is displayed and the led daily is lit. With the POWER + and POWER - buttons
scroll through the daily options, press the ON button to change the ON and OFF
intervals.
Scroll through the daily submenu for the various days of the week and the
various programming bands using the POWER + and POWER - buttons.
i Within a single day there are 3 different time-schedule programming
bands available. To scroll through the various parameters (day of the
week, programming band and on time-schedule) use the power
regulating buttons.
At this stage there appears on the top display a broken line or alternatively the
time set. On the left of the bottom one there appears the number of the time-
schedule band (1,2,3) while on the right the day selected (Mon, Tues, Wed, Thur,
Fri, Sat, Sun).
When the lamp led is lit it indicates that a heater on time-schedule is being
changed, while when the screw led goes on it indicates that an off time-
schedule is being changed.
Now enable the
LIGHTING/UNLOCKING button.
pre-selected time-schedule band by pressing
Page | 53
the