4/2 Report Codes - Bosch FPD-7024 Operation And Installation Manual

FPD-7024 | Operation and Installation Guide | 5.0
Pressing [9] retrieves the second digit options (point numbers). The following window appears:
4/2 ZONE RPT
POINT 1 D2
1-
POINT 2 D2
2-
POINT 3 D2
3-
POINT 4 D2
4-
POINT 5 D2
5-
POINT 6 D2
6-
POINT 7 D2
7-
POINT 8 D2
8-
MORE
9-
Press the number key that corresponds with your selection of event type (D2 stands for digit 2). Press
[#/Enter].
Pressing [9] retrieves additional second digit options (point numbers). The following window appears:
4/2 ZONE RPT
1- POINT 9 D2
2- POINT 10 D2
3- RETURN TO D1
Press the number key that corresponds to your selection. A window based on your previous selection
allowing entry of hex digits appears:
FIRE ALARM D1 ( )
0 THRU 9
<HISTORY>: A
<TEST>: B
<DISABLE>: C
<DRILL>: D
<SILENCE>: E
<RESET>: F
Enter the digit that corresponds to the selected condition by pressing a number key or one of the special keys
if a hex character is needed. Press [#/Enter] and the previous display appears.
5.7.2

4/2 Report Codes

4/2 Report Codes apply to system conditions but only when 3/1 or 4/2 format is selected. Two digits can be
programmed to be sent for each condition. The conditions that can be programmed are:
•
System in test, system in test restore: sent for walk test operations
•
Silence: sent when the silence key is pressed
•
Fire drill, fire drill restore: sent for fire drill operations
•
Open reset report: sent when the reset key is pressed
•
Low battery, low battery restore, AC failure, AC failure restore: sent for power problems
•
Test report: sent for manual or automatic communicator tests
•
Off normal at test: sent if the panel is off-normal at the automatic test time
•
Phone trouble, restore: sent for phone line problems
•
System trouble, restore: sent for general system problems
68
Control Panel Programming
Bosch Security Systems, Inc. | 1/10 | F01U008458-03