Ac Line Synch; Option Bus - Bosch FPD-7024 Operation And Installation Manual

.
The display scrolls through the TIMERS options. Press [5] for DISPLAY RATE. The following window
appears:
DSPLY RATE (__)
.25 X (1-16): ___
Enter desired value and press [#/Enter]. The existing setting is shown in parentheses on the first line. After
you program the display rate, the previous window appears.
5.3.2

AC Line Synch

Shortcut: 0-
When AC power is available, the control panel uses the line frequency to stabilize the real-time clock. This
setting must match the frequency of the local AC power (60 Hz in the US).
The following window appears:
AC LINE SYN (__)
50 Hz
1-
60 Hz
2-
Press the number key that corresponds to your selection and press [#/Enter]. The existing setting is shown in
parentheses on the first line. After you program AC Line Synch, the previous window appears.
5.3.3

Option Bus

Update Bus
Shortcut: 0-
When devices are added or removed from the option buses, this feature queries both option buses and
updates the list of connected devices. This enables the new devices and removes supervision for devices no
longer present.
Be sure the count of devices displayed when this operation completes matches the number of
devices installed on both buses. Devices not detected during the update bus operation will not
operate and will not be supervised.
These menu items are allowed only at the local keypad.
The following window appears:
OPTION BUS (M/M)
UPDATE BUS
1-
SETUP KEYPDS
2-
Press [1] to program the system to update the bus. After you program Update Bus, the following window
appears:
UPDATE COMPLETE
TOT BUS DEVS: X
Then the previous window appears.
Keypad Setup
Shortcut: 0-
Bosch Security Systems, Inc. | 1/10 | F01U008458-03
FPD-7024 | Operation and Installation Guide | 5.0
, 3- , 3-
PROG PROG SYSTEM
, 3- , 4-
PROG PROG SYSTEM
, 3- , 4-
PROG PROG SYSTEM
AC LINE SYNC
OPTION BUS
OPTION BUS
Control Panel Programming
45