Compatible Devices; Table 8: Compatible Devices - Bosch FPD-7024 Operation And Installation Manual

FPD-7024 | Operation and Installation Guide | 1.0

1.2.12 Compatible Devices

Table 8: Compatible Devices
Device
D7030 Eight Point LED
Annunciator
D7030X Eight Point LED
Annunciator
D7030X-S2 Eight Point
LED Annunciator
D7030X-S8 Eight Point
LED Annunciator
D7032 Eight Point LED
Annunciator Expander
FMR-7033 Alphanumeric
LCD Keypad
FPC-7034 Four Point
Expander
D7035/B Octal Relay
Module
FMR-7036 Fire
Annunciator Keypad
FPP-RNAC-8A-4C
Remote NAC Power
Supply
D7039 Multiplex
Expansion Module
D7042/B Eight-Input
Remote Module
D7048/B Octal Driver
Module
FMM-7045 Mux Pull
Station
D7044 Mux Single Input
Fire
D7044M Mux Mini
Contact Module
14
Function
Identifies the location of a fire alarm for up to eight zones allowed per system.
Identifies the location of a fire alarm for up to eight zones allowed per system.
An eight-zone LED annunciator, of which two zones are reserved for supervisory functions.
It has Power and Trouble LEDs plus eight-zone LEDs that can be labeled individually.
An eight-zone LED annunciator, of which all eight zones are reserved for supervisory
functions. It has Power and Trouble LEDs plus eight-zone LEDs that can be labeled
individually.
Attaches to a D7030X and identifies the location of a fire alarm for eight additional zones.
Connects up to four-keypads per system.
Allows the FPD-7024 Control Panel to support four additional points. The FPC-7034 plugs
into the control panel and provides four Class B, Style 4 loops that are identical in
characteristics to the loops on the control panel. One FPC-7034 is allowed per system.
Provides eight Form C relay outputs for addition to the system. The outputs are
programmable and can be activated by system events. Each output operates independently
of the other seven outputs for complete flexibility. The D7035 connects to the option bus; up
to two are allowed per system. Refer to the D7035 Installation Guide (P/N: 37280) for
required enclosure modification. The D7035B comes installed on a mounting skirt.
Establishes the location of a fire alarm.
Adds four NFPA 72 Class B, Style Y Notification Appliance Circuits through the option bus
and is supervised by the control panel. The FPP-RNAC-8A-4C connects to the option bus of
the FPD-7024 control panel and up to four are allowed per system.
Provides either 2 two-wire (Class B, Style 4) multiplex buses or 1 four-wire (Class A, Style 6)
multiplex bus. In Class A mode, up to 120 addressable points can be added. In Class B
Mode, up to 247 addressable points can be added. The D7039 connects directly to the
control panel. One is allowed per system.
Provides eight Class B, Style 4 input points. Connect up to 15 modules to MUX Bus A, and
15 on MUX Bus B. The D7042 is powered by 12 VDC supplied by the option bus power
terminals, in addition to the two-wire data connection. The D7042 can not be used on a
signal line circuit (SLC) configured for Class A, Style 6 operation.
Provides eight open collector transistor outputs for addition to the FPD-7024 Fire Alarm
Control panels. It connects to the control panels through the option bus.
UL Listed fire alarm initiating device.
Connects a contact device to the multiplex bus of the FPD-7024 with a supervised local
loop. The D7044 draws operating power from the FPD-7024.
Connects a contact device to the multiplex bus of the FPD-7024 with a supervised input
loop. The D7044 draws operating power from the FPD-7024.
Overview
Bosch Security Systems, Inc. | 1/10 | F01U008458-03