Phone Control - Bosch FPD-7024 Operation And Installation Manual

FPD-7024 | Operation and Installation Guide | 5.0
5.6.2

Phone Control

Shortcut: 0-
In addition to features associated with each phone and IP number, each phone line has associated features.
PHONE CONTROL
LINE #1
1-
LINE #2
2-
Press the number key that corresponds with your selection. Line 1 and Line 2 have the same options. The
following window appears:
PHONE CONTROL #1
MONITOR LINE
1-
DIALING TYPE
2-
Refer to Monitor Line and Dialing Type in the following sections for explanations about the phone control
options.
Monitor Line
Shortcut: 0-
The phone line monitor feature, that supervises the connection of the phone line to the control panel, can be
disabled for each phone line. If an IP address is entered for the Phone/IP number, set the monitor to No. If
this is not programmed to No, a trouble is generated.
Choose Line 1 or Line 2 (refer to the window above). The display scrolls through the Phone Control options.
Press [1] for MONITOR LINE. The following window appears:
MONITOR LINE #1
____: YES (1) NO (0)*
* Refer to Table 15 on page 32.
Press [1] for YES or [0/Prog] for NO. The previous window appears.
Dialing Type
Shortcut: 0-
This feature determines the format the control panel uses for dialing on each phone line. The TONE/PULSE
setting first tries tone dialing. If that fails, it switches to pulse dialing. If an IP address is entered in for the
Phone/IP number, the control panel ignores this setting.
Choose Line 1 or Line 2 (refer to the window below). The display scrolls through the Phone Control options.
Press [2] for DIALING TYPE. The following window appears:
PHONE CONTRO (__)
PULSE ONLY
1-
TONE/PULSE
2-
TONE ONLY
3-
Press the number key that corresponds to your selection. The previous window appears.
64
, 6- , 2-
PROG PROG ACC'NTS
, 6- , 2-
PROG PROG ACC'NTS
, 6- , 2-
PROG PROG ACC'NTS
Control Panel Programming
PHONE/IP CONTROL
PHONE/IP CONTROL
PHONE/IP CONTROL
Bosch Security Systems, Inc. | 1/10 | F01U008458-03