Pin Required - Bosch FPD-7024 Operation And Installation Manual

FPD-7024 | Operation and Installation Guide | 5.0
This feature tells the system how many keypads to supervise. It automatically performs an update bus
operation as it completes.
OPTION BUS
UPDATE BUS
1-
SETUP KEYPDS
2-
Press [2] to set up keypads. The following window appears:
# OF KEYPADS (__)
(0-4): ____
Enter the desired value and press [#/Enter]. The existing setting is shown in parentheses on the first line.
After you set up the keypads, the update bus operation proceeds, then the previous window appears.
5.3.4

PIN REQUIRED

Local
Shortcut: 0-
A PIN can be required before performing operations. Enter the PIN at the local or built-in keypad.
The following window appears:
PIN REQUIRED?
LOCAL
1-
REMOTE
2-
Press [1] to require a PIN at the local keypad. The following window appears:
LOCAL KEYPD PIN?
____:YES(1)NO(0)
Press the number key that corresponds to your selection. The existing setting is shown in front of the colon
on the second line. After making your selection, the previous window appears.
Remote
Shortcut: 0-
The following window appears:
PIN REQUIRED?
LOCAL
1-
REMOTE
2-
Press [2] to select remote PIN. The following window appears:
REMOTE KYPD PIN?
____: YES (1) NO (0)
Press the number key that corresponds to your selection and press [#/Enter]. Refer to Table 15 on page 32.
The existing setting is shown in front of the colon on the second line. After you select the PIN requirement,
the previous window appears.
A PIN can be required before operations can be performed using the remote keypads on the
option bus. If the remote keypads are not otherwise secured, this option must be set to YES to
comply with NFPA and Local requirements.
46
, 3- , 5-
PROG PROG SYSTEM
, 3- , 5-
PROG PROG SYSTEM
Control Panel Programming
PIN REQUIRED?
PIN REQUIRED?
Bosch Security Systems, Inc. | 1/10 | F01U008458-03