Securing Stitches - Bernina artista 200 Owner's Workbook

M
ASTERING
Y
OUR
BERNINA
®
Owner's manual pg.____
• Fold each fabric piece in half to 1½" x 6".
5
• Find the / " seam line on the guide plate.
8
• The BERNINA ® artista 200 secures in four ways:
1 – Select stitch #3 and sew a few stitches. Press the Quick Reverse button located on the front
of the sewing machine and the machine will sew in reverse until the button is released. Continue
stitching the seam and secure the end in the same manner.
2 – Select stitch #5 and stitch. The machine will automatically reverse after five stitches, then
continue in a forward motion. Stitch to the end of the seam, then press and release the Quick
Reverse button. The machine will stitch backward five stitches, and then continue forward again
five stitches and stop.
3 – Select stitch #324. The machine will automatically sew six small stitches, then continue in a
forward motion with a regular stitch length. At the end of the seam, press and release the Quick
Reverse button. The machine will sew six small stitch stitches, and then stop.
4 – Select stitch #332. Engage the Securing function to put a securing stitch at the beginning and the
end of each pattern repeat. In regular sewing, turn the Securing function off after the first stitch and
back on again after the last stitch is taken.
BERNINA
M Y
ASTERING OUR

SECURING STITCHES

Fabric: Firm fabric – 4 pieces, 3" x 6" each
Needle: 90/14 Embroidery
Thread: 30 wt. cotton embroidery
Presser Foot: Reverse Pattern Foot #1C
®
8/15/02
BERNINA
S A
ECTION
®
artista 200
artista 200/14