M
ASTERING
Y
OUR
BERNINA
®
• Select stitch #2 - SW 2mm and SL satin - Tension 1 - Tailor Tack Foot #7.
• Place fabrics right sides together; sew with a
• Sew slowly - adjust motor to ½ speed.
• When finished sewing the seam, pull the two layers firmly apart and press open.
• Change to Open Embroidery Foot #20/20C for better visibility - may need to stabilize the
stitching area to prevent tunneling.
• From the right side, anchor the fagoting to the fabric on either side with a decorative stitch
through the seam allowance. (Stitch #406 is used in the illustration.) Adjust width and length
as desired; engage Mirror Image as needed.
• Trim any excess seam allowance if needed.
• To "bundle" fagoting stitches, select the triple straight stitch #6, attach Reverse Pattern Foot
#1C to the machine, center the foot over the fagoting stitches, and sew through the middle. For
this sample, start bundling at center and sew to one end, leaving half the stitching unbundled.
BERNINA
M
Y
ASTERING
OUR
FAGOTING & BUNDLING
Fabric:
Firm fabric - 2 pieces, 3 "x 5" each
Needle:
90/14 Embroidery
Thread:
Embroidery
Presser Feet:
Tailor Tack Foot #7 (optional accessory)
Open Embroidery Foot #20C
Reverse Pattern Foot #1C
®
8/15/02
BERNINA
5
/
" seam on a 5" side.
8
S
E
ECTION
®
artista 200
artista 200/86