Lace Insertion - Bernina artista 200 Owner's Workbook

M
ASTERING
Y
OUR
BERNINA
®
Fabric:
Needle:
Thread:
Presser Feet:
• Pin or spray-baste the lace in position on top of the lightweight cotton.
First Run:
• Select stitch #1 - SL 1.5mm-2mm with the needle position set at half left.
• Place the edge of the lace to the left edge of the guide on the foot and sew.
• Sew the right side in a like manner using the needle position set at half right.
• From the back, carefully cut through the fabric, in the middle of the two
rows of stitching.
• Press the fabric back against the straight stitch.
Second Run:
• Select stitch #2 - SW 1.5mm-2mm and SL 0.75mm-1mm with the needle position set at half left.
• Place edge of lace first to the left of the blade, with the needle in the half left position, and sew the
zigzag stitch over the edge of the lace and the previously sewn straight stitch.
• Sew the right side in a like manner using the needle position set at half right.
• Trim surplus fabric from the wrong side.
BERNINA
M Y
ASTERING OUR

LACE INSERTION

Lightweight cotton 4" x 6"
9" insertion lace, ½ "- ¾" wide
75/11 Universal
60 wt. cotton
Edgestitch Foot #10/10C (optional accessory)
®
8/15/02
BERNINA
S E
ECTION
®
artista 200
artista 200/80