Bernina artista 200 Owner's Workbook page 85

M
ASTERING
Y
OUR
BERNINA
®
Fabric:
Stabilizer:
Needle:
Thread:
Presser Foot:
• Draw eight lines, evenly spaced, across the tear-away stabilizer.
• Secure the stabilizer to the wrong side of the fabric using a light application of 505 spray.
• Carefully loosen and adjust the tension on the Secondary Bobbin Case. Note: Adjust the bobbin
case over a white bowl or bag; this will help prevent losing the screw if it should be loosened too
far and fall out.
• Wind bobbins of each of the heavy, decorative threads using the Bobbin Winder mechanism.
• Select stitch #332, the feather stitch. This stitch works very well for bobbin work. For bobbin work,
tighten the needle (top) tension; select the Tension symbol and adjust to a setting of 8 to begin.
Adjust the stitch length and width as long and as wide as possible.
• With the right side of the fabric facing down and the stabilizer face up, stitch along one of the
lines marked on the stabilizer.
• Select stitch #711, the daisy stitch. Adjust the tension, stitch length and stitch width as above.
• Stitch along another of the marked lines.
• Continue in this manner, stitching a line of feather stitch and daisy stitch for each of the four cords.
Note: Each cord may require a slightly different bobbin or needle tension adjustment.
• Trim and mount the sample.
BERNINA
M Y
ASTERING OUR
BOBBIN WORK BASICS
Firmly woven - 5" x 8"
Heavy weight tear-away, 5" x 8"
505 temporary spray adhesive
90/14 Universal
Needle: Mettler Metrosene (all purpose polyester)
Bobbin: four different heavy, decorative threads such as
Pearl Crown Rayon, Candlelight, Ribbon Floss, and Designer 6
Open Embroidery Foot #20C and
Secondary Bobbin Case (optional accessory)
®
8/15/02
BERNINA
S E
ECTION
®
artista 200
artista 200/85