Bernina artista 200 Owner's Workbook page 82

M
ASTERING
Y
OUR
BERNINA
®
• Insert Double Wing needle.
• Engage the Security Program, selecting the Double Wing needle.
• You will be stitching on the bias (diagonal) of the fabric; this allows the holes created by the Wing
needle to open more easily. To help support the fabric and stitching, using a spray adhesive bond a
layer of heavy, water-soluble stabilizer to the wrong side of the organdy.
• Select stitch #1. Adjust the stitch length to 3mm. Stitch across the fabric from corner to corner.
At the end, carefully pivot and sew back along the first line of stitching, with the "wing" portion
of the Double needle entering into the holes created by the first line of stitching.
• "Frame" the center row of stitching with two additional lines of stitching:
- 1st row - Blindstitch #9 - sew in one direction, pivot, and stitch back to create a "chain" effect
- 2nd row - stitch #733
• Carefully remove the stabilizer following the manufacturer's directions.
• Trim and mount the sample.
BERNINA
M Y
ASTERING OUR
WINGING IT TWICE
Fabric: Cotton Organdy, 6" x 6" square
OESD Aqua Film stabilizer, 6" x 6"
Needles: Double Wing
Thread: Embroidery thread
Presser Foot: Reverse Pattern #1C or
Open Embroidery #20C
®
8/15/02
BERNINA
S E
ECTION
®
artista 200
artista 200/82