Bernina artista 200 Owner's Workbook page 16

M
ASTERING
Y
OUR
BERNINA
®
Owner's manual pg.____
• Fold fabric to 3" x 6".
• Select stitch #751.
• Select Pattern Repeat 2X; stitch until the machine stops.
• Select Vertical Mirror Image; stitch until the machine stops.
• Select Pattern Extend 2X; stitch until the machine stops.
• Select stitch #2 - (the one used for satin stitching in the previous exercise).
Notice the computer remembered all the changes made to the stitch.
Note: The temporary altered memory of the artista 200 remembers the following stitch parameters:
Stitch Length, Stitch Width, Needle Position, Tension, Balance, Horizontal and Vertical Mirror Image,
Pattern Extend, Long Stitch, and Pattern Repeat.
• Using the 0-9 function, select stitch #751. Notice that the stitch alterations are as you left them.
• The computer will remember any and all stitches you alter, as long as the clear
button is not used and as long as the machine is not turned off.
RETURNING TO BASIC SETTINGS
• Three options:
BERNINA
M Y
ASTERING OUR
TEMPORARY ALTERED MEMORY
Fabric:
Needle:
Thread:
Presser Foot:
1. Press the external CLR button
2. Manually set changes back to the basic mark
3. Turn the artista off
®
8/15/02
BERNINA
Firm fabric – 6" x 6"
90/14 Embroidery
30 wt. cotton embroidery
Reverse Pattern Foot #1C
S A
ECTION
®
artista 200
artista 200/16