Picot Edge - Bernina artista 200 Owner's Workbook

M
ASTERING
Y
OUR
BERNINA
®
Fabric:
Needle:
Thread:
Presser Foot:
Presser Foot Pressure:
Owner's manual pg.____
• Select the Vari-Overlock stitch #3 - SW 4-5mm and SL 1.5mm.
• Fold under one 6" edge about ¼" and press.
• Place fabric to the left and position it under the foot so that when the stitch swings to the right, it
will just pass over the folded edge.
• On knit fabrics the surplus can be trimmed from the wrong side close to the stitch.
• On woven fabrics it is advisable to first sew a row of small zigzag stitches about ¼" from where
the picot edge will be. Then you will be able to trim close to these stitches after the picot has
been stitched.
• Trim and mount the sample.
This stitch is suitable for fine, soft fabrics and is ideal for lingerie and nightwear.
BERNINA
M Y
ASTERING OUR

PICOT EDGE

®
8/15/02
BERNINA
Lightweight single knit cotton, 6" x 4"
80/12 Universal
All-purpose sewing thread
Reverse Pattern Foot #1C
Decrease slightly (turn to left)
S C
ECTION
®
artista 200
artista 200/51