Manual Buttonholes - Bernina artista 200 Owner's Workbook

M
ASTERING
Y
OUR
BERNINA
®
Owner's manual pg.____
• Fold the fabric in half to 3" x 6". Press and insert the stabilizer.
• Draw a line 1½" from the fold along the 6" length.
• Mark two horizontal lines, running between the fold and the drawn line, spaced about 2" apart.
• Select buttonhole #51 – the standard buttonhole — and the man function from the function toolbar.
• Position the foot over the first short line, aligning the fold of the fabric with the
on the stitch plate, behind the foot.
• Sew the first side of the buttonhole, engaging box #1 on the screen.
• Stop at the drawn line and select box #2.
• Continue stitching the remaining steps of the buttonhole; touch esc.
• Select buttonhole #57 and the man function. Place the second short line under the presser foot as before.
• Sew the keyhole buttonhole on the second marked line; touch esc.
• Cut one buttonhole open.
• Trim and mount the sample.
BERNINA
M Y
ASTERING OUR

MANUAL BUTTONHOLES

Fabric: Heavy flannel, 6" x 6"
Stabilizer: 1 piece, 3" x 6"
Needle: 90/14 Embroidery
Thread: 30 weight cotton embroidery
Presser Foot: Standard Buttonhole Foot #3C
®
8/15/02
BERNINA
5
S C
ECTION
®
artista 200
/ " marking
8
artista 200/42