Bernina artista 200 Owner's Workbook page 142

M
ASTERING
Y
OUR
BERNINA
®
Fabric: Firm, woven fabric, 8" x 10"
Stabilizer: 1 piece heavy tear-away, 8" x 10"
Needle: 90/14 Embroidery
Thread: 30 wt. cotton embroidery
Presser Foot: Sideways Motion Foot #40C
This is a very fun and different way to use the artista 200's
directional capabilities. It makes use of the new Subdivsion
feature. A Subdivision acts as a stop within a combination,
and also allows you to continue sewing other parts of a
stored stitch combination.
• Combine the following using the Combi Stitch feature:
- stitch #654, stitch length = 2mm
- stitch #651, default settings
- stitch #654, SL=2, Horizontal Mirror Image
- Subdivision
- stitch #39, CDL4 - 1x
- Subdivision
- stitch #431, default settings
- Subdivision
- Save the combination.
• Place the stabilizer under the fabric.
• Engage Needle Stop Down.
• Begin sewing the motif. After the first three patterns
have been stitched, the artista 200 will automatically
stop at the Subdivision.
• Release the foot control, then begin sewing again.
The artista 200 automatically moves to the directional
section of the combination, then stops at the next
Subdivision.
• Release the foot control. Raise the presser foot and
pivot the fabric 180º. Resume stitching; the next
stitch pattern stitches over the directional stitching.
Again, the artista stops automatically at the end of
the stitch pattern.
• Pivot 90º and continue sewing the combination as
shown.
• Repeat to create an interesting linear embellishment.
• Trim and mount sample.
BERNINA
M Y
ASTERING OUR
DIRECTIONAL BAUBLES
®
8/15/02
BERNINA
S I
ECTION
®
artista 200
artista 200/142