Pleats Vs Tucks - Bernina artista 200 Owner's Workbook

M
ASTERING
Y
OUR
BERNINA
®
Reverse Pattern Foot #1C:
• Mark fabric as shown; fold fabric along the lines; press.
• Select straight stitch #1, needle position = far right (use
the Quick Select feature of the artista 200). Fold fabric
along the first line. Stitch first tuck, aligning the right edge
of Foot #1C with the fold.
• Fold the fabric along the second line. Move needle position to the far left; stitch tuck, aligning fold
with the right edge of the foot.
Note: By placing the fold even with the right edge of the foot, it is possible to stitch eleven
different tuck sizes, one corresponding to each of the artista 200's eleven needle
positions. Each needle position is approximately 1mm from the next.
• Attach the Quilting/Seam Guide to the back of Foot #1C. Adjust the guide to 2¼" from the center
needle position. Fold fabric along the third line and stitch a third tuck aligning the guide along the fold.
Edgestitch Foot #10C:
• Fold the fabric along the fourth line. Place the fold to the left of the center blade of Foot #10C,
with the fold against the blade.
• Move the needle position all the way to the left; sew.
• Fold the fabric along the fifth line; position the fabric as for the last fold.
• Move the needle position to a "half left" position; sew.
Note: Very small tucks are possible with this foot.
BERNINA
M Y
ASTERING OUR

PLEATS vs TUCKS

Fabric: Medium weight cotton, 5" x 15"
Needle: 80/12 Universal or Sharp
Thread: All-Purpose
Presser Foot: Reverse Pattern #1C and
Quilting/Seam Guide and
Edgestitch #10C (optional accessory)
®
8/15/02
BERNINA
1½" 2"
S D
ECTION
®
artista 200
4" 5" 1"
artista 200/72
1½"