Transmission Lever; Multi-Switch Housing - Can-Am DS 70 Operator's Manual

vmo2008-008-008_b
REAR BRAKE LEVER
Step 1: Squeeze brake lever and maintain
Step 2: Move lever lock
To release mechanism:
brake lever. Lever lock should auto-
matically return to its original position.
Brake lever should return to rest po-
sition. Always release parking brake
before riding.

6) Transmission Lever

A 3-position lever.
CAUTION: Always completely stop
the vehicle and apply the brakes
prior to moving the transmission
lever.
vmo2008-008-018_a
TRANSMISSION LEVER PATTERN
1. Transmission lever
2. Forward (F)
3. Neutral (N)
4. Reverse (R)
To change the transmission position,
completely stop vehicle, apply brakes
then move lever to the desired po-
sition while moving lever forward or
backward. Do not force lever.
______________________
68
F: Forward
It is the normal driving range. It al-
lows the vehicle to reach its maximum
speed.
N: Neutral
This position disengages the transmis-
sion to allow manual vehicle move-
ment or towing.
R: Reverse
This allows the vehicle to go back-
ward.
Squeeze
Before moving vehicle in reverse,
ensure the path behind is clear of
obstacles or bystanders. Remain
seated.

7) Multi-Switch Housing

The controls located on this multi-
switch housing are:
vmo2008-008-010_a
1. Engine stop switch
2. Engine start button
3. Daytime running lights switch
4. Choke lever
Engine Stop Switch
This switch can be used to stop engine
and as an emergency control.
The engine will turn over but will not
start if the engine stop switch is placed
in the OFF position.
WARNING