Appendix - Installation of Remote Termination Panels (RTPs) - Overview
Appendix - Installation of Remote Termination Panels (RTPs)
Overview
The Remote Termination Panel (RTP) provides an easy way to connect the HC900 controller to the field
wiring. The RTP integrates some of the typical externally connected components, reducing wiring and
setup time. It also minimizes the need for multiple wires under a single screw connection by expanding the
connectivity of the shared terminals of the I/O modules.
There are three RTP types:
•
8 ` Analog Input
•
Relay Output
•
16 point Analog Input/Digital Input/Digital Output/Analog Output
Figure 92 – Example installation (not shown: 2
Revision 19
06/14
HC900 Process Controller Installation and User Guide
See page
208
215
219
nd
RTP & cable for high capacity AI/DI/DO)
207