Appendix - Installation Of Remote Termination Panels (Rtps); Overview - Honeywell HC900 User And Installation Manual

Appendix - Installation of Remote Termination Panels (RTPs)

Overview

The Remote Termination Panel (RTP) provides an easy way to connect the HC900 controller to the field
wiring. The RTP integrates some of the typical externally connected components, reducing wiring and
setup time. It also minimizes the need for multiple wires under a single screw connection by expanding the
connectivity of the shared terminals of the I/O modules.
There are three RTP types:

8 ` Analog Input

Relay Output

16 point Analog Input/Digital Input/Digital Output/Analog Output
Figure 96 – Example installation (not shown: 2
217 HC900 Process & Safety Controller User and Installation Manual
See page
218
225
229
nd
RTP & cable for high capacity AI/DI/DO)
Revision 6
21 April 2017