Appendix B Installation of Remote Termination Panels (RTPs)
Overview
The Remote Termination Panel (RTP) provides an easy way to connect the HC900 controller to the field
wiring. The RTP integrates some of the typical externally connected components, reducing wiring and
setup time. It also minimizes the need for multiple wires under a single screw connection by expanding the
connectivity of the shared terminals of the I/O modules.
There are three RTP types:
Analog Input
•
Relay Output
•
Digital Input/Digital Output/Analog Output
•
Revision 5
9/03
Shield drain wire
Terminals for field
wiring
Figure 60 Example installation (all RTPs are dimensions shown)
HC900 Hybrid Controller Installation and User Guide
See page
184
191
194
HC900 Controller
Cable (various
lengths available)
RTP mounted on
DIN rail
94mm
3.70"
111mm
4.38"
183