Power Connections; Ce Wiring; 0/4-20 Ma, 0/1-5 Vdc Input Signal Connections; 0/4-20 Ma, 0/1-5 Vdc Feedback Signal Connections - Honeywell HercuLine 10260A Installation, Operation And Maintenance Manual

10260A Series Actuators Installation, Operations, and Maintenance Manual

3.4.3 Power Connections

For connections, refer to section 3.4.2. Customer Connections.

3.4.4 CE Wiring

For CE approved units clamp the ferrite filter provided (087414) around the AC mains power supply wires
(hot, neutral, ground) inside the case near the conduit entry.

3.4.5 0/4-20 mA, 0/1-5 Vdc Input Signal Connections

For connections, refer to section 3.4.2. Customer Connections.
ATTENTION
Shielded and grounded cables are recommended.

3.4.6 0/4-20 mA, 0/1-5 Vdc Feedback Signal Connections

For connections, refer to section 3.4.2. Customer Connections.
ATTENTION
Shielded and grounded cables are recommended.
24 10260A Series Actuators – Installation, Operations, and Maintenance 2/03