Hudson 480-490 Series Service Manual page 90

84 BODY MANUAL
FIGURE 133
CONVERTIBLE TOP AND REAR
CURTAIN
REMOVAL:
Rear curtain removal includes items thru 6. Top and rear
curtain removal includes items 1 thru 8. Removal of top
decking only includes items 1,2,3,4,7, and 8.
1. Remove snap fasteners and chrome moulding from rear
belt line (A), Figure 133.
2. Remove 6 Phillips head screws and tacks from top and
rear curtain at belt line (A).
3. Remove chrome moulding and retainer from top at rear
bow (B).
4. Remove all tacks from top at rear bow (B). Fold top
material forward over bows.
5. Remove tacks from top side pads at rear bow (B). Fold
pads forward over bows.
6. Remove tacks from rear curtain at rear top bow (B) and
remove rear curtain.
7. Remove top, front header rear chrome moulding (C)
(narrow) and retainer.
8. Remove all tacks from top at front header (C). Remove
top material and clean all sealing compound from area
between two top front header chrome mouldings. Lightly
hammer down all tack holes in all tacking strips.
INSTALLATION
Rear curtain installation includes items
1,2,3,4 and items 7,8, and 9.
Top and rear curtain installation includes items 1 thru 11.
Top decking only includes items 3 thru 11.
FIGURE 134
FIGURE 135
FIGURE 136