Figure 3-39: Bg7 Module Timecode Submenu - Tektronix TG700 User Manual

BG7 Black Generator
TIMECODE Submenu

Figure 3-39: BG7 module TIMECODE submenu

3–70
Use this submenu to set timecode parameters for the selected output. This menu is
present only if GPS7 module is installed.
NOTE. To display the TIMECODE submenu, the BG7 module hardware must be
version 1.2 or above and the mainframe must have software version 5.1 or above
installed.
This submenu is available only when NTSC, NTSC No Setup, or PAL is the
selected signal format. This submenu is not available when the selected signal
format is HD SYNC.
Use the up (▲) or down (▼) arrow button to change the menu items. The
following figure shows the TIMECODE submenu.
TG700 TV Signal Generator Platform User Manual