Figure 3-40: Bg7 Module Vitc Submenu - Tektronix TG700 User Manual

BG7 Black Generator
VITC Submenu
(GPS7 module only)
3–72
Use this menu to enable or disable the output of the VITC signal and to select the
video line on which the VITC signal will be inserted. Use the up (▲) or down
(▼) arrow button to change the menu items. The following figure shows the
VITC submenu.

Figure 3-40: BG7 module VITC submenu

OUTPUT. Use this menu item to enable or disable insertion of a VITC on the
selected line. Use the left (◄) or right (►) arrow button to select ENABLE or
DISABLE. Press the ENTER button to confirm the selection.
Line number. Use this menu item to select the video line on which the VITC
signal will be inserted. Use the left (◄) or right (►) arrow button to select the
video line number. The line number range varies by format: you can select from
line 10 to line 20 for NTSC, and from line 6 through line 22 for PAL. Press the
ENTER button to confirm the selection.
TG700 TV Signal Generator Platform User Manual