Installation Of Lna Assembly; Single-Thread Lna Installation - Comtech EF Data CSAT-5060 Installation And Operation Manual

C-Band Transceiver
LNA Installation
8.2 I
NSTALLATION OF
8.2.1 S -T
INGLE HREAD
Refer to Figure 8-5.
The LNA is mounted to the OMT as follows:
• Waveguide Kit, CPR229, PN AS/0461
To install a single LNA to an antenna:
1. Remove the protective cover from the antenna OMT and LNA.
2. Install the appropriate gasket on the antenna end of the LNA.
3. Position the LNA (with gasket) in place on the antenna and
LNA A
SSEMBLY
LNA I
NSTALLATION
a. If only one of the mounting surfaces has a groove, use the
half-thick gasket.
b. If both mounting surfaces have grooves, use the full thick
gasket.
fasten using the supplied hardware.
8–6
Figure 8-5. Installation of
Single-Thread LNA
Revision 1
MN/CSAT5060.IOM