Assemble Redundant Configuration - Comtech EF Data CSAT-5060 Installation And Operation Manual

C-Band Transceiver
CSAT-5060 100/125 Watt Installation
C.5.2.2

Assemble Redundant Configuration

Step
1
2
3
4
5
6
7
Figure C-16. Pipe Blocks
Procedures
Place Unistrut bracket (1, Figure C-1) on a flat surface.
Slide two springnuts (9) into the channel of the Unistrut bracket.
Fasten two pipe blocks (11) loosely to the springnuts using two bolts (6),
two flat washers (7), and two splitlock washers (8). (See Figure C-17.)
Repeat procedure for second Unistrut bracket (1)
Position Unistrut bracket (1) with pipe blocks (11) against the mounting
pole, slide the pipe blocks (11) until they contact the mounting pole.
Ensure the pipe blocks (11) are centered to the Unistrut brackets (1).
Tighten the hardware.
Figure C-17. Looking down at Pipe Blocks
C–17
Revision 1
MN/CSAT5060.IOM