4.2 FILE
4 COMMUNICATIONS
4.2.3 SETTINGS FILE CONVERTER
The Settings File converter allows the user to convert former versions setting files to another one.
When the option is selected, a .ajs file chooser will be shown, to select the settings source file. After selecting it, a model
selection window will appear for choosing the version of the new file. Please, note that the Relay I/O configuration an the
Logic configuration won't be converted.
4
Figure 4–3: WARNING POP-UP
Finally, the settings will be charged on the Enervista MII Setup on offline mode, so it must be saved in order to get the new
.ajs file.
4.2.4 PROPERTIES
From the File – Properties option, the program will show a screen including the relay model information, firmware version,
etc., as shown on Figure 4–4:
Figure 4–4: MODEL/VERSION
4-4
MIFII Digital Feeder Relay
GEK-106237P