GE MIFII GEK-106237P Instruction Manual page 226

APPENDIX E
APPENDIX E OPTION C MODELSE.1INTRODUCTION
This appendix describes the main features implemented in MIFII relays with protocol option C:
• IEC 60870-5-103 communication protocol added
• Two independent communication ports
The general settings of these models are described in the following table:
ENERVISTA MII SETUP
PRODUCT SETUP PRODUCT SETUP
Relay Status Relay Operation
Frequency Frequency
ModBus Format ---
Phase CT ratio Phase CT Ratio
Ground CT ratio Ground CT Ratio
HMI Password ---
Comm Password ---
Slave Address ---
Communication Baud rate ---
Communication 2 Baud ---
rate
Prefault cycles Prefault Cycles
GEK-106237P
HMI DEFAULT
PRODUCT SETUP
Relay Operation DISABLE
Frequency 60 Hz
ModBus Format Intel
Phase CT Ratio 1
Ground CT Ratio 1
HMI Password 1
Comm Password 1
Slave Address 1
Comm Baud Rate 9.6
COM2 Baud rate 9.6
Prefault Cycles 50
MIFII Digital Feeder Relay
E.1 INTRODUCTION
RANGE STEP
READY / DISABLE NA
50/60 Hz NA
Intel/Motorola NA
1-4000 1
1-4000 1
1-9999 1
1 – 255 1
1 – 255 1
0.3, 0.6, 1.2, 2.4, 4.8, NA
9.6, 19.2
0.3, 0.6, 1.2, 2.4, 4.8, NA
9.6, 19.2
10-140 1
E-1
E