C-Flex Enabled; C-Flex Disabled; C-Flex Comfort Feature - Respironics REMstar Pro M Series User Manual

4.2.2 C-F
The C-Flex comfort feature allows you to adjust the level of air pressure relief that you feel when
you exhale during therapy. Your home care provider can enable or disable this feature.
4.2.2.1
When your provider enables C-Flex, a C-Flex level will already be set for you on the device. If this
is not comfortable for you, you can increase or decrease the setting.
To change the C-Flex setting, press the C-Flex button. The screen shown in Figure 4–4 appears,
with an arrow above the current C-Flex setting.
The setting of 1 provides a small amount of pressure relief, with higher numbers providing ad-
ditional relief. To change the pressure relief, press the + or – buttons to increase or decrease the
setting.
Note:
You can also view and change the C-Flex setting by navigating to the C-Flex Set-
ting screen from the Patient Setup menu (see Section 4.3).
4.2.2.2
If C-Flex has not been prescribed for you and your provider has disabled the C-Flex feature, the
following screen appears when you press the C-Flex button, and you cannot enable or adjust the
setting.
4-4
C F
LEX OMFORT EATURE
C-F E
LEX NABLED
F
IGURE
C-F D
LEX ISABLED
F
IGURE
C-FLEX
1 2 3
4–4 C-F S S
LEX ETTING
C-Flex Setting
FLEX comfort has been
disabled on this unit.
4–5 C-F D
LEX ISABLED
CREEN
S
CREEN
REM P M S
STAR RO ERIES
U M
SER ANUAL