Getting To Know The Monitor; Smartmonitor 2 Features; Top Panel Features; Power Button - Respironics SmartMonitor2 Operator's Manual

Professional

Hide thumbs

Table Of Contents

Table of Contents

When you receive the SmartMonitor 2, make sure that you have all the necessary items and that they are

not damaged. Immediately report anything missing or damaged to Respironics.

The standard package should include the following:

SmartMonitor 2 Features

This section describes the physical features of the

SmartMonitor 2 unit.

Top Panel Features

POWER Button

The gray POWER button turns the SmartMonitor 2 on. When

you turn the monitor on, all lights and the alarm come on briefly

and the monitor performs a system test. After a pause,

monitoring will begin.

To turn the monitor off do the following:

Press and hold the blue RESET button.

Press and release the gray POWER button.

Wait 2 seconds, and then release the RESET button.

RESET Button

The blue RESET button resets the alarm lights on the

SmartMonitor 2. It also silences the Memory Full (or Memory

Almost Full) and Low Battery warning alarms. For more

information, see the section on Responding to Alarms. The

RESET button also answers a ringing modem phone call when

in monitoring mode.

Remember that the RESET button will not silence patient or loose lead alarms.