Advanced Chipset Settings - North Bridge Chipset Configuration - Kontron KTGM45/mITX User Manual

KTD-N0793-0
7.7.1 Advanced Chipset Settings – North Bridge Chipset Configuration
North Bridge Chipset Configuration
Thermal Memory Reference Code(TMRC)
TS on DIMM
Memory Hole
Boots Graphic Adaptor Priority
Internal Graphics Mode Select
Gfx Low Power Mode
PEG Port Configuration
PEG Port
► Video Function Configuration
v02.67+ (C)Copyright 1985-2009, American Megatrends, Inc.
Feature
TS on DIMM
Memory Hole
Boots Graphic Adaptor Priority
Internal Graphics Mode Select
Gfx Low Power Mode
PEG Port
Page 89
BIOS SETUP UTILITY
[Disabled]
[Disabled]
[PEG/PCI]
[Enabled,32MB]
[Enabled]
[Auto]
Options Description
Enable/Disable Thermal Sensor on DIMM.
Disabled
Enabled
Disabled
Disabled
15MB-16MB 15MB-16MB
IGD Select which graphics controller to use as the
PCI/IGD primary boot device.
PCI/PEG
PEG/IGD
PEG/PCI
Disabled Select the amount of system memory used by the
Integrated Graphic Device.
Enabled, 32MB
Enabled, 64MB
Enabled, 128MB
Disabled This option is applicable for SFF only.
Enabled
Auto
Auto
Disabled Disabled
Enable PEG Always Enable PEG Always
KTGM45 Users Guide
Chipset
ENABLE: Allow remapping
of overlapped PCI memory
above the total physical
memory.
Disable: Do not allow
remapping of memory
<-> Select Screen
|| Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
BIOS setup