Table of Contents
Advertisement
KTD-N0793-0
** Note:
Regardless of the memory configuration used (Dual Channel, Single Channel or Flex) the SLOT 1 must
always be populated. This is a requirement of the Intel® Management Engine.
Warning: Do not attempts to ignore below steps as it might result in corrupted BIOS
Before BIOS update make sure there is only RAM in SLOT 0 (socket closest to the CPU).
!
After BIOS update make sure there is RAM in SLOT 1 (socket farthest away from the CPU)
The below tables shows examples of possible Memory slot configurations for the support of the various
Memory modes.
Dual Channel Interleaved Mode Configurations
DDR3 SLOT 1 (Ch. A)
1 GB
2 GB
(The capacity of the Ch. A equals the capacity of Ch. B).
Single Channel Asymmetric Mode Configurations
DDR3 SLOT 1 (Ch. A)
1 GB
2 GB
Dual Channel Flex Mode Configurations
DDR3 SLOT 1 (Ch. A)
2 GB
1 GB
The first 1GB of each of the Channels (A and B) will be used in Interleaved Mode and the remaining RAM
will be used in Asymmetric Mode.
Page 17
DDR3 SLOT 0 (Ch. B)
1 GB
2 GB
DDR3 SLOT 0 (Ch. B)
DDR3 SLOT 0 (Ch. B)
1GB
2 GB
KTGM45 Users Guide
System specification
Ch. B, DDR3 (SLOT 0)
Ch. A, DDR3 (SLOT 1) **
Advertisement
Table of Contents
