Table of Contents
Advertisement
KTD-N0793-0
Introduction
This manual describes the KTGM45/mITX and KTGM45/Flex boards made by KONTRON Technology A/S.
The boards will also be denoted KTGM45 family if no differentiation is required.
The KTGM45 boards supports the Intel® Core™ 2 Extreme Mobile Processor (Penryn), the Intel® Core™2
Quad Mobile processor (Penryn) Q9100, the Intel® Core™2 Duo Mobile processor (Penryn) and Intel®
Celeron® (Meron).
KTGM45 family differences
KTGM45/mITX
KTGM45/Flex
Use of this Users Guide implies a basic knowledge of PC-AT hard- and software. This manual is focused on
describing the KTGM45 Board's special features and is not intended to be a standard PC-AT textbook.
New users are recommended to study the short installation procedure stated in the following chapter before
switching-on the power.
All configuration and setup of the CPU board is either done automatically or manually by the user via the
CMOS setup menus. Only exception is the Clear CMOS jumper (J13).
Page 8
Format
PCI
PCIe x4
mITX
1
Flex
2
KTGM45 Users Guide
Introduction
miniPCIe
CF
-
1
1
1
-
-
Advertisement
Table of Contents
