Sco - Moxa Technologies PCI Express Board User Manual

PCI Express Board User's Manual

SCO

• SCO OpenServer 5
• SCO OpenServer 6
• SCO UnixWare 7
Follow the steps given in this section to install the SCO OpenServer 5/6 & SCO UnixWare 7
driver. The installation procedures for SCO UnixWare 7 and SCO OpenServer 5/6 are similar.
1. Copy the driver file .tar to your host.
2. #tar xvf <driver tar file>
#/tmp/moxa/mxinstall
3. The window shown below will open next. Press RETURN to continue.
=============================================================
Copyright© 2008 Moxa Inc.
All Rights Reserved.
Moxa Smartio/Industio Family Device Driver Installation (Ver. 1.11)
=============================================================
For SCO UnixWare 7
Tar files, please wait.....O.K.
Press RETURN to continue
4. <Note: If your environment is SCO OpenServer 5/6, you could skip step 4 & 5>
When you see the screen below, select "Esc" to exit and reboot your computer.
Board No.
MOXA Smartio/Industio Family Installation Utility (Ver 1.11)
Smartio/Industio Family Basic Configuration
Board Type
1 None
2 None
3 None
4 None
PgDn: getty Setting
Enter: Confirm Input Value
I/O Address
------------
------------
------------
------------
Esc: Exit
Tab: Change Item
3-49
Software Installation
Interrupt Bus/Dev No.
------------ ------------
------------ ------------
------------ ------------
------------ ------------