Chapter 2 Hardware Installation - Moxa Technologies PCI Express Board User Manual

This chapter describes the PCI Express Series hardware installation procedure. Since the BIOS
automatically assigns the PCI Express board's IRQ number and I/O addresses, you must plug in
the board before installing the driver.
This chapter covers the following topics:
CP-118EL Dimensions
DIP Switch Settings (CP-118EL only)
CP-168EL Dimensions (Unit= mm)
CP-104EL Dimensions (Unit= mm)
CP-102E Dimensions (Unit: mm)
CP-102EL Dimensions (Unit: mm)
CP-132EL Dimensions (Unit: mm)
CP-132EL-I Dimensions (Unit: mm)
CP-114EL Dimensions (Unit: mm)
CP-114EL-I Dimensions (Unit: mm)
Plugging the Board into an Expansion Slot
Hardware Installation
Chapter 2
2
2