Phone Controls
Display the Date and Time
You can change your phone display to show the date and time. This uses the TmDay function. Note that
this function overwrites all other display information.
TransTalk MDW 9040 users do not have access to this feature.
To set/cancel date and time display:
1. Press Menu
2. Using the and keys, display and select TmDay (This feature can also be set under a DSS key,
see Programming Functions Against DSS Keys).
Call Timer
You can run a call timer. If you start the timer before making a call, it will reset to zero when you dial and
again when you are connected.
Note that after ending a caller the timer is switched off.
TransTalk MDW 9040 users do not have access to this feature.
To start the call timer:
1. Press Menu
2. Select Timer (This feature can also be set under a DSS key, see Programming Functions
Against DSS Keys).
Display Call Information
You can display information about which number another extension is calling.
To display call information:
1. Press Menu
2. Select Call.
3. Enter the extension or group number (use the top-left display key to backspace).
4. Press and select Listen.
5. Press Exit
4400, 4600 and 6400 Phone User Guide
IP Office
.
.
twice.
.
Issue 10f (15th September 2005)
Page 25