Yamaha 2010 XMAX YP125R Service Manual page 420

2. Check the turn signal switch.
Refer to "CHECKING THE
SWITCHES" on page 8-73.
OK ↓
3. Check the hazard switch.
Refer to "CHECKING THE
SWITCHES" on page 8-73.
OK ↓
4. Check the turn signal/hazard relay.
Refer to "CHECKING THE TURN
SIGNAL/HAZARD RELAY" on page
8-81.
OK ↓
5. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-19.
OK ↓
Replace the meter assembly.
The fuel meter, fuel level warning light, or both fail to come on.
1. Check the fuel sender.
Refer to "CHECKING THE FUEL
SENDER" on page 8-86.
OK ↓
2. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-19.
OK ↓
Replace the meter assembly.
The coolant temperature meter, coolant temperature warning light, or both fail to come on.
1. Check the coolant temperature sen-
sor.
Refer to "CHECKING THE COOL-
ANT TEMPERATURE SENSOR"
on page 8-87.
OK ↓
NG →
The turn signal switch is faulty. Replace
the left handlebar switch.
NG →
The hazard switch is faulty. Replace the
right handlebar switch.
NG →
Replace the turn signal/hazard relay.
NG →
Properly connect or repair the signaling
system wiring.
NG →
Replace the fuel sender.
NG →
Properly connect or repair the signaling
system wiring.
NG →
Replace the coolant temperature sensor.
8-23
SIGNALING SYSTEM