Yamaha 2010 XMAX YP125R Service Manual page 265

Valve-stem-to-valve-guide clear-
ance (intake)
0.010–0.037 mm (0.0004–0.0015
in)
Limit
0.080 mm (0.0031 in)
Valve-stem-to-valve-guide clear-
ance (exhaust)
0.025–0.052 mm (0.0010–0.0020
in)
Limit
0.100 mm (0.0039 in)
2. Replace:
• Valve guide
TIP
To ease valve guide removal and installation,
and to maintain the correct fit, heat the cylinder
head to 100 °C (212 °F) in an oven.
M MMM M MMM M M MMM M
a. Remove the valve guide with the valve guide
remover "1".
VALVES AND VALVE SPRINGS (YP125R)
M MMM M M MMM M M MMM M
b. Install the new valve guide with the valve
guide installer "2" and valve guide remover
"1".
Valve guide position
a. Valve guide position
c. After installing the valve guide, bore the valve
guide with the valve guide reamer "3" to ob-
tain the proper valve-stem-to-valve-guide
clearance.
TIP
After replacing the valve guide, reface the valve
seat.
MMM
L LLL L LLL L
5-20
Intake
17.0–17.4 mm (0.670–0.685 in)
Exhaust
14.0–14.4 mm (0.551–0.567 in)
Valve guide remover (ø4.5)
90890-04116
Valve guide remover (4.5 mm)
YM-04116
Valve guide installer (ø4.5)
90890-04117
Valve guide installer (4.5 mm)
YM-04117
Valve guide reamer (ø4.5)
90890-04118
Valve guide reamer (4.5 mm)
YM-04118
L LLL L L LLL L L LLL L L LLL L LLL