2. Check:
• Front brake disc
Refer to "CHECKING THE FRONT BRAKE
DISC" on page 4-22.
3. Lubricate:
• Oil seal lips
• Speed sensor oil seal lip
Recommended lubricant
Lithium-soap-based grease
4. Install:
• Spacer
• Speed sensor
• Front wheel
TIP
• Make sure that the speed sensor and the
wheel hub are installed with the projection "a"
of the wheel hub inserted in a slot "b" of the
speed sensor.
• When installing the speed sensor, make sure
that the projection on the wheel hub does not
damage the lip of the speed sensor oil seal.
• Make sure that the slot "c" in the speed sensor
fits over the stopper "d" on the outer tube.
b a
5. Install:
• Wheel axle
• Wheel axle pinch bolt
c
d
4-14
Wheel axle
70 Nm (7.0 m·kgf, 50 ft·lbf)
Wheel axle pinch bolt
23 Nm (2.3 m·kgf, 17 ft·lbf)
ECA37P1030
NOTICE
Before tightening the wheel axle, push down
hard on the handlebar several times and
check if the front fork rebounds smoothly.
FRONT WHEEL