1. Front brake hose
2. Radiator fan motor relay
3. Starting circuit cut-off relay
4. Speed sensor lead
5. Right front turn signal light
6. Radiator fan motor
7. Radiator fan motor lead
8. Wire harness
9. Rear brake pipe
10. Horn leads
11. Starter motor lead
12. Headlight relay
13. Rear brake hose
14. Throttle cables
A. Position the plastic locking tie above the frame
cross member.
B. Point the end of the plastic locking tie to the right,
and then cut off the excess end of the tie to 0
–
mm (0
0.20 in).
C. Point the end of the plastic locking tie forward, and
then cut off the excess end of the tie to 0
–
(0
0.20 in).
CABLE ROUTING (YP125R)
–
5
–
5 mm
2-34