Removing The Fuel Tank; Checking The Fuel Pressure - Yamaha 2010 XMAX YP125R Service Manual

EAS26630

REMOVING THE FUEL TANK

1. Extract the fuel in the fuel tank through the
fuel tank filler hole with a pump.
2. Remove:
• Fuel hose connector cover "1"
3. Remove:
• Fuel hose "2"
ECA37P1023
NOTICE
• Be sure to disconnect the fuel hose by
hand. Do not forcefully disconnect the
hose with tools.
• Although the fuel has been removed from
the fuel tank, be careful when removing the
fuel hose, since there may be fuel remain-
ing in it.
• Do not disconnect the fuel hose from the
fuel hose connector. Disconnect the con-
nector from the fuel pump.
TIP
Before removing the hose, place a few rags in
the area under where it will be removed.
4. Remove:
• Fuel sender "1"
TIP
Remove the fuel sender with the fuel sender
wrench "2".
Fuel sender wrench
90890-11098
2
1
1
2
5. Remove:
• Fuel tank
TIP
To remove the fuel tank, lower the radiator "1".
ECA37P1021
NOTICE
When removing the fuel tank, be sure not to
pull forcefully on the radiator hoses "2".
2
1
EAS37P1071

CHECKING THE FUEL PRESSURE

1. Check:
• Pressure regulator operation
M MMM M MMM M M MMM M
a. Remove the fuel hose connector cover "1",
and then remove the fuel hose "2" from the
fuel pump.
ECA37P1024
NOTICE
Although the fuel has been removed from
the fuel tank, be careful when removing the
fuel hose, since there may be fuel remaining
in it.
TIP
Before removing the hose, place a few rags in
the area under where it will be removed.
b. Connect the pressure gauge "3" and fuel
pressure adapter "4".
7-3
FUEL TANK
2
2
M MMM M M MMM M M MMM M
1
2
MMM