1. Wire harness
2. Rear brake hose
3. License plate light lead
4. Right tail/brake light assembly coupler
5. Left tail/brake light assembly coupler
6. Seat lock cable
7. Cylinder head breather hose
8. Intake air temperature sensor coupler
A. Point the end of the plastic locking tie to the right,
and then cut off the excess end of the tie to 0
–
mm (0
0.20 in).
B. Route the license plate light lead between the
water guard and the license plate light bracket.
CABLE ROUTING (YP250R)
–
5
2-92