Maintenance; Adjustment, Periodic Maintenance, Periodic Replacement Parts, And Replacement Consumables By Service Engineer - Canon MX7600 Service Manual

MX7600

1. MAINTENANCE

1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement
Consumables by Service Engineer
(1) Adjustment
Adjustment
EEPROM
initialization
Destination
settings (EEPROM
settings)
Ink absorber
counter / wetting
liquid counter
resetting
(EEPROM
settings)
Ink absorber
counter value
setting
(EEPROM
settings)
Ink absorber /
wetting liquid unit
replacement
Paper feed motor
position
adjustment
Automatic print
head alignment
Manual print head
alignment
Grease application - At carriage unit replacement
Ink system
function check
LCD language
settings
Timing
- At logic board replacement
- At logic board replacement
- At logic board replacement
- At ink absorber
*1
replacement
- At wetting liquid unit
*1
replacement
- At logic board replacement
- When the ink absorber
*1
becomes full
- When the wetting liquid unit
*1
becomes empty
- At paper feed motor
replacement
- At print head replacement
- At logic board replacement
- When print quality is not
satisfying
- At print head replacement
- At logic board replacement
- When print quality is not
satisfying
- At lift cam replacement
- To gears
- At logic board replacement
- At spur base replacement
- At carriage unit replacement
- At logic board replacement
Purpose
To initialize settings
To set destination.
To reset the ink absorber or
wetting liquid counter.
To set the ink amount data in
the ink absorber to the ink
absorber counter.
To replace the ink absorber or
the wetting liquid unit with a
new one.
To adjust the belt tension.
(Position the paper feed motor
so that the belt is stretched
tight.)
To secure the dot placement
accuracy.
To secure the dot placement
accuracy.
To maintain sliding properties
of the following items:
- Carriage shaft
- Lift cam bushing
- Machine sliding portions
(gears)
To maintain detection
functionality for presence of the
ink tanks and each ink tank
position.
To set the language to be
displayed on the LCD.
1 / 65
TABLE OF CONTENTS
Tool
None. 1 min.
Perform in the service
mode.
None. 1 min.
Perform in the service
mode.
None. 1 min.
Perform in the service
mode.
None. 1 min.
Perform in the service
mode.
Screwdriver, a pair of 20 min.
tweezers, etc.
None. 5 min.
4 sheets of plain paper. 9 min.
Perform in the user
mode.
2 sheets of plain paper. 10 min.
Perform in the user
mode.
FLOIL KG-107A 1 min.
None. 1 min.
Perform in the service
mode.
None. 1 min.
Perform in the user
Approx.
time