Adjustment, Periodic Maintenance, Periodic Replacement Parts, And Replacement Consumables By Service Engineer - Canon PIXUS 50i Service Manual

1. MAINTENANCE
1.1 Adjustment, Periodic Maintenance, Periodic Replacement Parts, and
Replacement Consumables by Service Engineer
(1) Adjustment
Adjustment
EEPROM
initialization
Destination settings
Waste ink counter
resetting
Print head alignment
(2) Periodic maintenance
No periodic maintenance is necessary.
(3) Periodic replacement parts
There are no parts in this printer that require periodic replacement by a service engineer.
(4) Replacement consumables
There are no consumables that require replacement by a service engineer.
Timing
At logic board ass'y
replacement
At logic board ass'y
replacement
When the following 4
items are replaced at the
same time:
- Drain pack ass'y
(QL2-0194)
- Ink absorbers
(QC1-1210/1211/1212)
At print head or logic
board ass'y replacement
1 - 1
Purpose
To initialize settings other
than the following:
- USB serial number
- Destination setting
- On -arrival cleaning flag
- Waste ink counter
- Infrared Plug & Play
on/off flag (to enable/disable
Plug & Play installation of
the printer driver for the
IrDA I/F)
To set the destination.
To reset the waste ink
counter.
To ensure accurate dot
placement.
Approx.
Tool
time
None. 1 min.
None. 1 min.
None. 1 min.
Computer 2 min.
(settings via
the printer
driver)