Maintenance; Adjustment, Periodic Maintenance, Periodic Replacement Parts, And Replacement Consumables By Service Engineer - Canon iX7000 Series Service Manual

iX7000

1. MAINTENANCE

1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and
Replacement Consumables by Service Engineer
(1) Adjustment
Adjustment
EEPROM
initialization
Destination
settings
(EEPROM
settings)
Ink absorber
counter
resetting
(EEPROM
settings)
Ink absorber
counter value
setting
(EEPROM
settings)
Wetting liquid
counter value
setting
(EEPROM
settings)
Ink absorber
replacement
Blade cleaner
unit
replacement
Paper feed
motor position
adjustment
Automatic print
head alignment
Manual print
Timing
- At logic board
replacement
- At logic board
replacement
- At logic board
replacement
- At ink absorber
replacement
- At logic board
replacement
- At logic board
replacement
- At blade cleaner unit
replacement
- When the ink absorber
becomes full
- When the wetting liquid
is used up
- At paper feed motor
replacement
- At print head
replacement
- At logic board
replacement
Purpose
To initialize settings
To set destination.
To reset the ink absorber
counter.
To set the ink amount data
in the ink absorber to the
ink absorber counter.
To set the wetting liquid
counter value.
To replace the ink
absorber with a new one.
To replace the blade
cleaner unit with a new
one.
To adjust the belt tension.
(Position the paper feed
motor so that the belt is
stretched tight.)
To secure the dot
placement accuracy.
1 / 53
TABLE OF CONTENTS
Tool
*1
1 min.
Service Tool
Perform in the
service mode.
*1
1 min.
Service Tool
Perform in the
service mode.
*1
1 min.
Service Tool
Perform in the
service mode.
*1
1 min.
Service Tool
Perform in the
service mode.
*1
1 min.
Service Tool
Perform in the
service mode.
Screwdriver, a pair 15 min.
of tweezers, etc.
Screwdriver, etc. 10 min.
None. 5 min.
None. (Plain paper) 6 min.
Perform in the user
mode.
10 min.
Approx.
time