Table of Contents
Advertisement
6. CHART OVERVIEW
6.1.12
How to enter alphanumeric data
On some screens it is necessary to enter alphanumeric data. The data can be input
two ways: software keyboard or trackball.
Alphanumeric data entry from the software keyboard
A software keyboard is also available for entry of alphanumeric data. Do as follows to
use the software keyboard. Display the keyboard before opening menus.
1. On the InstantAccess bar, press the [DISP], [
software keyboard. The [BS], [Enter], [↑], [↓],[ ←], [→] and [Spacebar] on the key-
board function the same as those keys on the keyboard of the Control Unit.
Space bar
2. To switch between the alphabet keyboard and symbols keyboard, click the [!$&]
key.
3. Click the input box.
4. Click appropriate keys and finally click the [Enter] key.
To erase the software keyboard, click the X button at the top right corner of the key-
board.
Alphanumeric data entry with the trackball module
The trackball module can also be used to enter alphanumeric data.
1. Put the cursor in the input box. Up and down arrows
appear at the right side of the box.
2. Enter data by one of the methods shown below.
• Spin the scrollwheel to set data. Upward to decrease the value; downward to
increase the value.
• Click
6-12
Alphabet keyboard
to increase the value;
] and [ON] buttons to show the
Symbols keyboard
to decrease the value.
Advertisement
Table of Contents
Troubleshooting
