How To View Waypoint Information - Furuno FCR-21x9-BB Operator's Manual

14. HOW TO MONITOR ROUTES
14.4

How to View Waypoint Information

Click the [Route] and [Route INFO] buttons on the InstantAccess bar to show the
[Route Information] dialog box. Click the [Waypoints] tab.
*
* Scroll list horizontally to view
No. Item
1 To WPT, GO
button
Distance
Departure
Actual Average
SPD
2 Waypoint list
3 Check ETA win-
dow
WPT, Distance
Plan
Actual
Off Plan
SPD Calculate
Suggested SPD The system calculates suggested speed so that ETA to the final WPT
Start Calculate
4 Total WPTs
Total Distance
14-4
The system chooses a next waypoint automatically. Check that the To way-
point is the desired one. The system will automatically advance to a next
waypoint when you pass the To waypoint. The default To WPT is WPT1. If
you desire a different one, select it here and the click the [GO] button.
Distance from current position to selected waypoint.
The time the route was selected for monitoring.
Actual speed
The waypoint list provides for each waypoint WPT no., name, latitude and
longitude position, ETA, plan speed, bearing and distance to leg, steering
mode (rhumb line or great circle),
radius, channel limit, speed max, and margin.
Parameters for checking ETA. The arrow to the left of [Check ETA] collapse
or display the [Waypoints] and [User Chart] tabs.
Select a WPT to find the distance to that waypoint from current position.
The planned ETA to the selected waypoint.
The actual ETA to the selected waypoint.
The time difference between planned ETA and calculated ETA to final
WPT, when different. The indication is prefixed with "-" if earlier than
planned; "+" if later than planned.
Enter speed and ETA (time and date) to find the speed to use to arrive by
the ETA.
would be same as planned ETA if type of optimization was "Time table"..
Click to start calculation. The button label changes to [Stop Calculate].
The total number of waypoints in the route.
The total distance of the route.
Description