How To View Status Of Chart Cells - Furuno FCR-21x9-BB Operator's Manual

7. HOW TO MANAGE CHARTS
How to delete a group of chart cells
You can delete group of chart cells as follows:
1. In the Chart maintenance mode, click the [Manage Charts] button on the
InstantAccess bar to show the [Filter] window.
2. Click the [Edit] button.
3. Select the name of the group with the pull-down list at the item [Group name].
4. Click the [Remove] button.
5. Click the [Close] button.
How to select the group to view
In the Chart maintenance mode, click the [Manage Charts] button on the InstantAc-
cess bar to show the [Filter] window. Select the group to view from the pull-down list
at [Group].
7.7.2

How to view status of chart cells

The [Cell Status] dialog box shows the status of the chart cells stored in the system.
To show this dialog box, get into the Chart maintenance mode then click the [Cell Sta-
tus] button on the InstantAccess bar.
• Type: Type of chart cell, ENC or C-MAP.
• Chart Name: Chart name
• Data Server: The name of the data server where the chart was downloaded from.
• Edition/Issued Date: Edition no. and issued date of the chart cell.
• Update: Num/Date: No. and date of the update of the chart cell.
• Updated: "yes" is shown if the cell is up-to-date, "no" if the cell is not up-to-date,
"maybe" means the cell has not been updated from more than one month.
7-13